Product Description:
The iU3D has always paid attention to product quality.We choose the best materials that can be found in the market, coupled with high-precision CNC machining,and strict quality assurance can bring this high-quality HOTEND.We believe that only high-quality products can guarantee the quality of your work.Please believe in our quality and believe that you will not regret when you receive the goods.
Brass Nozzle:
We choose the best materials that we can find on market combined with high precision CNC maching to bring this high quality brass nozzle (Tolerance 0.01 mm),Sleek Inner Wall,Smooth filament feed-out Less glitches Lower viscosity. Brass Nozzles High cost performance, Suitable for printing PLA ABS TPU PA and other conventional materials.
Hardened steel nozzle:
The Hardened steel nozzle,each of which is molded by five axle CNC.Strict quality control enables it to possess Higher temperature,Higher Wear Resistance,Better Durability,More Precise (Tolerance 0.01 mm).Can be perfectly compatible with special filaments such as PEI, PEEK, PETG, Carbon Fiber Mixture,Glass Fiber Mixture, Filled PLA or Glow-in-the-dark filament.
If you 3D print with carbon fibre, filled PLA, or glow-in-the-dark filament,special filaments then this is the nozzle you need! Carbon filled filaments cause rapid and significant damage to standard nozzles.We've developed these incredibly wear-resistant nozzles to deal with the toughest filaments on the marke.
Plated Copper Nozzle and Heater Block:
The Plated Copper Nozzle and Heater Block are engineered for ultimate high temperature performance.Made from a special high temperature copper-alloy with a softening point of well above 500°C,and with much-increased thermal conductivity.This Plated Copper Nozzle is perfect for high temperature applications,while working perfectly with all filaments,including PLA, ABS, PETG,TPU,PP,PC,PA,Nylon,PEEK,PEI and composite materials containting abrasive additives,such as carbon fiber,steel,wood,boron caroffere,tungsten etc.
The Plated Copper Nozzle and Heater Block have the characteristics of high temperature resistant,high thermal conductivity,non-stick surface,reduces the adhesion of filament,nickel based plating is not easy to wear. Making it perfect for the high-temperature 3D printing that other nozzles can't handle.(but is particularly important at temperatures above 280°C where a silicone sock can't be used.)
Titanium Alloy Bi-metal Heatbreak:
The front end of the Bi-Metal Heatbreak is made of high-quality GRADE5 titanium alloy and the rear end is made of copper alloy material,Heat Insulation Good,Titanium alloy reduces heat upward conduction at the heating position and copper for heat dissipation to accelerate heat conduction.We use a special process to hold them firmly together. You don't need to worry about it being damaged.
The Nozzle and Heatbreak appearance is more shiny,thread precision improvement.The inner wall of the tube is smoother (reducing the chance of filament clogging).The interface is smoother and more precise (can effectively prevent the filament from leaking).
The Ender 3 S1 Hotend is equipped with an upgraded Bi-Metal Heatbreak and Titanium Alloy Screws, providing excellent thermal insulation performance. It minimizes heat loss to the maximum extent, enhancing printing efficiency and reducing temperature fluctuations in the hotend. This results in a more stable and reliable hotend, reducing the occurrence of heat creep and improving print quality.
The NTC100K B3950 thermistor size of 3 x 5.5mm,Total length about 52mm, Made of high quality materials, ensuring superior stability, durability, and more accurate temperature measurement. Avoid problems during printing, provide users with a better printing experience.(The sensor is capable of measuring higher temperatures, Reaching up to 300°C.)After sales guarantee: each defective item can be replacement for free or refund.If any question, please feel free to contact us, iU3D is committed to providing you with the best service!
Only Compatible with FDM 3D Printer Equipped with Sprite Extruder or Sprite Extruder Pro Kit,like Ender 3 S1, Ender 3 S1 pro, Ender 3 S1 Plus,CR10 Smart pro, Sermoon V1, Sermoon V1 Pro 3D Printer.
Statement: This hotend kit needs to be assembled by yourself.
Packing List:Ender 3 S1 Bimetal Heatbreak X 1Aluminum Heater Block or Plated Copper Heater Block X 1Brass Nozzle or Hardened steel Nozzle or Plated Copper Nozzle 0.4mm X 1NTC100K B3950 Thermistor Sensor X 1 (Temperature measurement can be up to 300 degree)Heater Cartridge X 1 (Size: 6X20mm, 24V 40W with terminal XH2.54, total length with terminal about 73mm)Titanium Alloy Screws X 2Gift：Silicone Sock X 1Note：When the printing temperature is to exceed 280℃, you need to remove the silicone sock in advance.
