• New Update 2023 - The S2 filament dryer has been equipped with an additional hot air fan at the bottom to improve air circulation and ensure a more even temperature inside the housing. In addition, a new filament outlet has been added so you can freely choose the direction. This dryer helps to bring the filament effortlessly into the optimal condition for printing.
• Better Printing With Dry Filament - SUNLU S2 Filament Dry Box will remove excess moisture of 3D printing filament, which help you avoid common problems like clogging, poor adhesion and layer migration caused by the dampness of the filament.
• Heating More Evenly, Drying Faster - As an upgraded product, the S2 drying box adopts a double heating element structure, which heats up faster and evenly heat.
• Convenient Touch Screen Operation - Our Upgraded Filament Drying Box can adjust temperature (35~70℃) and time (1~99 hours) through the touch screen. After completing setting , the time, temperature, humidity and other indicators will be displayed on the screen in real time.
• Remember Your Operation - You can choose consumable code like PLA to jump to the corresponding default temperature and time, or adjust them you want. The settings before the shutdown will be remembered until you change settings again.

Packing List

• 1* Filament Dryer
• 1* Adaptor
• 1* Instruction

• Remember Your Settings
  Double-click \"ON/OFF\" to enter the shutdown state. After restarting, the drying temperature, filament selection, and LED mode will retain the settings before the shutdown, and the drying time will be restored to the default 6 hours.
• High Compatibility Filament Dryer
  Our S2 Filament Dryer Box fits most normal filaments like PLA, PETG, TPU, ABS, etc.. You could try to choose corresponding Filament Code and it will set the proper temperature and time for your filament to dry.

NOTE

1. Before printing, it is recommended to bake it for ≥3 hours, and then print, the effect will be better.
2. When the ambient temperature is low and the drying oven does not heat up to the set value, it is necessary to extend the baking time> 1 hour.
3. It will have better printing effect when used with printer.

• Say Goodbye to Poor 3d Printing Due to Wet Filament - Wet 3D printing filament leads to filament build-up, clogging, poor adhesion and layer shifting. SUNLU FDM 3D Filament Dryer Enclosure can dry during printing to improve your 3D model and reduce the impact of the objective environment on 3D filament printing.
• Personalised Temperature Setting - User can adjust the temperature of the drying box according to different 3D filament type, ambient temperature, humidity and other factors. Adjustable temperature range 35℃~55℃. Suitable for more than 20 types of 3D printing filament commonly used in the market.
• Personal Drying Time Setting - The default drying time of the dryer is 6 hours, but you can also set the drying time manually. The time setting range is 0~24 hours. Commonly used 3D filament in the market only needs 3-6 hours drying time under normal circumstances to get a good printing feeling and effect.
• Compatible with 99% of 3d Filament Spools - A: Maximum capacity of SUNLU drying box is Φ210*85(H)mm. B: Compatible with all popular 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC, etc.; C: Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm.
• User-friendly Design - A: The design of two rollers inside the box allows you to print while drying; B: 2-inch large-screen LCD monitor, can display temperature and time clearly and brightly; C: Ultra quiet design, less than 10db during operation, no disturbance to your life and work; D: Exquisite package design - the best gift: buy one to give to your friends who love 3D printing.

• 1* Filament Dryer
• 1* Adapter
• 1* Instruction
• 2* Rollers

On Apr 3, 2024 at 03:55:27 PDT, seller added the following information: