SUNLU Dryer Box:S1 PlusS2S4SP2E2AMSMax heating Temp：55℃
Capacity：1 Roll 1KG FilamentMax heating Temp：70℃
Capacity：1 Roll 1KG FilamentMax heating Temp：70℃
Capacity：4 Rolls 1KG FilamentMax heating Temp：70℃
Capacity：2 rolls 1kg Filament/
1 Roll 2KG Filament/
1 Roll 3KG FilamentMax heating Temp：110℃
Capacity：2 rolls 1kg Filament/
1 Roll 2KG Filament/
1 Roll 3KG FilamentMax heating Temp：70℃Compatible with all functions of the first-generation Bambu Lab AMS
SUNLU Neatly Wound Filament
Printing Temp&SpeedHeated Bed TempNet WeightFeaturePLA Light Weight
200-210℃：50 -100mm/s
190-210℃ ：50-150mm/s
210-230℃ ：150-300mm/s
230-260℃ ：300-600mm/s
50-60℃1KGSupports fast printing at 600mm/s; Good fluidity, fast printing without clogging, no shortage of materials: volume flow rate of 30mm ³/s.PLA+
195-205℃：50 -100mm/s
195-205℃：50 -100mm/s
205-215℃：50 -100mm/s
190-210℃ 50-150mm/s
210-230℃ 150-300mm/s
230-260℃ 300-600mm/s50-60℃1KG1. Supports high-speed printing at 600mm/s; 2. High toughness and good impact resistance;PLA Meta
185-195℃：50-100mm/s
195-225℃：100-200mm/s
50-60℃
1KGGood liquidity, supports fast printing without clogging; Printing temperature is 10 ℃ lower than ordinary PLA, more energy-efficient and environmentally friendly; Good toughness, not easy to break, and the printed works are resistant to falling and smashing.SILK PLA+205-215℃：50 -100mm/s
215-235℃：100-200mm/s
50-60℃
1KGThe model has a silky smooth surface and beautiful colors！PETG
230-240℃：50 -100mm/s
240-260℃：100-200mm/s
60℃-70℃
1KGGood toughness, resistant to drops and impacts; Good acid and alkali resistance!High-Speed Matte PETG
205-215℃：50 -100mm/s 240-250℃：100-300mm/s
260-270℃：300600mm/s
70℃-80℃
1KGPETG that supports fast printing at 600mm/s; Matte texture, with a delicate printed surface; Not easy to draw;ABS
250-260℃：50-100mm/s
260-280℃：100-200mm/s
80-100℃
(Insulated and sealed environment,better effect)
1KGHigh strength, good toughness, sturdy and durable!TPU（95A）
190-210℃：50-80mm/s
210-230℃：80-120mm/s
No need to heat0.5KG/1KGHigh resilience; The material is soft (95A) and has good ductility！TPU（90A）
195-205℃：50 -100mm/s
215-225℃：50 -100mm/s
190-210℃：50 -150mm/s
210-230℃：150-300mm/s
250-260℃：50 -100mm/s
240-250℃：50 -150mm/s
70-80℃
1KG
1. High strength and toughness, printing works are resistant to falling and smashing, sturdy and durable;
2. The short fiber content is 10%, and the printed works have a frosted texture;
