This isn't cheapest 5050 LED strip on on because it is made to strict UL specifications with name brand LED chips

CRI ( RA) 90 allowing proper color perception, light output exceed 20 lumen per LED!

16.4ft long flexible LED light strip with300 Epistar 5050 SMDs. They emit light at 120° dispersion angle. Color is a Bright White (color temperature 3150K - good match to Bright White CFL light bulbs, no Bluish nor Yellowish tint like some so called "White" LEDs use to emit, see pictures below). Strip consist of 300 pieces 5050 LEDsconsumingunder60 watt (12 volt5 amp DC) while emitting 4800 lumen of light equal to 5x65 watt incandescent light bulbs!These stripsare made as flexible printed copper circuit board 1/2" wide andonly1/8" thick with self adhesive3Mback.Extremely easy to install.Photo below shows an example of kitchen installation - Warm white strip was cut in 3 sections, 1/4" holes were drilled, connecting wires and power supply are hidden in cabinets. Less then one strip (about 12 ft of Bright white strip) is used in this installation. Stripcan becutevery1-7/8" (3 LEDs), each part can be soldered and powered by the same or additional 12 volt power supply. LEDs spacedless than 5/8"apart, 19 LEDs per ft.Thesestrips are perfect for kitchen under cabinet lighting,glass doorcabinet lighting, accent, pictureand decorative lighting,producebrilliant white light! The light output isequal to 5 x50 watthalogen bulbs. Please do not confuse with low power strips: these arevery brightLEDsand you'll need 12 volt regulated power supply capable of at least 6 Amp (6000 mA) output.Strip shipped with black (-) and red (+) wire leads attached.Optional clamp screw DC connector 2.1 mmcenter and 5.5mm inside diameter as pictured below can be added for $2.00.The expected life spanis more than50,000 hours.

Thanks for reading!

Here is a response we've got for this Item:

Perfect - exactly as described and an amazing deal!