UBB Store

3D Printer Nozzle Fit for MK10,for 1.75mm Filament Brass,0.2mm - 1mm Total 18pcs
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3D Printer Nozzle Fit for MK10,for 1.75mm Filament Brass,0.2mm - 1mm Total 18pcs
Price: CN $13.25
DocumentFeature:Stamp size on surface, convenient to pick the one you need.The hole of print nozzle is consistent size and machining, the thread is clean and well formed.Extruder brass print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, PCL etc.Specification:Fit for 3D Printer: MK10Material: BrassScrew Thread: M7Thread Length:5mmNozzle Diameter: Diameter: 4mmFit Filament Diameter: 1.75mmOverall Size: 13 x 9 mm / 0.51 x 0.35 inch (L*D)Package Content:2 x 0.2mm Nozzle2 x 0.3mm Nozzle2 x 0.5mm Nozzle2 x 0.6mm Nozzle2 x 0.8mm Nozzle2 x 1mm Nozzle6 x 0.4mm NozzleNOTE:Small accessories, please keep away from kiddie.After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.How to Replace Nozzles?1: Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).2: After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.Notice: Please don’t touch the old nozzle and heat block.3: Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.
  • Filament Refills PLA Filaments Silver 1.75mm, 250mm for 3D Printing Pen, 40pcs USD 15.34
  • 1.75mm Filament TPU Blue 0.25KG Dimensional Accuracy +/- 0.05mm for 3D Printer USD 34.22
  • 14x14x6mm Aluminum Heatsink Electronics Cooler for MOS IC Chip Silver 24 Pcs USD 9.2
  • Electronic Radiator Heatsink for Stepper Motor,3D Printer 40x40x11mm Black 10pcs USD 24.36
  • Electronics Cooler Heatsink for MOS GPU IC Chip Silver 15 x 9 x 5 mm 20pcs USD 15.91
  • M5 Tube Fitting for 3D Printer Push Fixings, for 4mm Tube 1.75mm Filament 10pcs USD 18.5
    3D Printer Nozzle Fit for MK10,for 1.75mm Filament Brass,0.2mm - 1mm Total 18pcs

    Feature:

    Stamp size on surface, convenient to pick the one you need.

    The hole of print nozzle is consistent size and machining, the thread is clean and well formed.

    Extruder brass print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, PCL for 3D Printer: MK10

    Material: Brass

    Screw Thread: M7

    Thread Length:5mm

    Nozzle Diameter: Diameter: 4mm

    Fit Filament Diameter: 1.75mm

    Overall Size: 13 x 9 mm / 0.51 x 0.35 inch (L*D)

    Package Content:

    2 x 0.2mm Nozzle

    2 x 0.3mm Nozzle

    2 x 0.5mm Nozzle

    2 x 0.6mm Nozzle

    2 x 0.8mm Nozzle

    2 x 1mm Nozzle

    6 x 0.4mm Nozzle

    NOTE:

    Small accessories, please keep away from kiddie.

    After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.

    How to Replace Nozzles?

    1: Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).

    2: After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.

    Notice: Please don’t touch the old nozzle and heat block.

    3: Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.

    Hot Item
    • 3D Printer Filament 1.75mm TPU Filament Dimensional Accuracy +/- 0.05mm RedUSD 34.32
    • Aluminum Heater Block, Specialized for MK7 MK8 M6 1.75mm Filament 5pcsUSD 18.23
    • 14x14.5x13mm Aluminum Heatsink Electronic Radiator for MOS IC Chip Black 10 PcsUSD 16.33
    • MK8 Drive Gear Direct Extruder Drive 5mm Bore for Extruder 5pcsUSD 18.23
    • 8.5x8.5x11mm Aluminum Heatsink Electronics Cooler for MOS IC Chip Black 20 PcsUSD 9.92
    Payment
    • We accept payment.
    • Please do not email us to ask for other payment option.
    • We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
    Shipping
    • For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
    • Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
    Return Policy
    • If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
    About Us
    • We are continually expanding our product selection to better serve your need.
    • We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
    • If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help Printer Nozzle Fit for MK10,for 1.75mm Filament Brass,0.2mm - 1mm Total 18pcs

      Feature:

      Stamp size on surface, convenient to pick the one you need.

      The hole of print nozzle is consistent size and machining, the thread is clean and well formed.

      Extruder brass print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, PCL for 3D Printer: MK10

      Material: Brass

      Screw Thread: M7

      Thread Length:5mm

      Nozzle Diameter: Diameter: 4mm

      Fit Filament Diameter: 1.75mm

      Overall Size: 13 x 9 mm / 0.51 x 0.35 inch (L*D)

      Package Content:

      2 x 0.2mm Nozzle

      2 x 0.3mm Nozzle

      2 x 0.5mm Nozzle

      2 x 0.6mm Nozzle

      2 x 0.8mm Nozzle

      2 x 1mm Nozzle

      6 x 0.4mm Nozzle

      NOTE:

      Small accessories, please keep away from kiddie.

      After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.

      How to Replace Nozzles?

      1: Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).

      2: After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.

      Notice: Please don’t touch the old nozzle and heat block.

      3: Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.

      • Filament Refills PLA Filaments Silver 1.75mm, 250mm for 3D Printing Pen, 40pcs USD 15.34
      • 1.75mm Filament TPU Blue 0.25KG Dimensional Accuracy +/- 0.05mm for 3D Printer USD 34.22
      • 14x14x6mm Aluminum Heatsink Electronics Cooler for MOS IC Chip Silver 24 Pcs USD 9.2
      • Electronic Radiator Heatsink for Stepper Motor,3D Printer 40x40x11mm Black 10pcs USD 24.36
      • Electronics Cooler Heatsink for MOS GPU IC Chip Silver 15 x 9 x 5 mm 20pcs USD 15.91
      • M5 Tube Fitting for 3D Printer Push Fixings, for 4mm Tube 1.75mm Filament 10pcs USD 18.5
      Hot Item
      • 3D Printer Filament 1.75mm TPU Filament Dimensional Accuracy +/- 0.05mm RedUSD 34.32
      • Aluminum Heater Block, Specialized for MK7 MK8 M6 1.75mm Filament 5pcsUSD 18.23
      • 14x14.5x13mm Aluminum Heatsink Electronic Radiator for MOS IC Chip Black 10 PcsUSD 16.33
      • MK8 Drive Gear Direct Extruder Drive 5mm Bore for Extruder 5pcsUSD 18.23
      • 8.5x8.5x11mm Aluminum Heatsink Electronics Cooler for MOS IC Chip Black 20 PcsUSD 9.92
      Payment
      • We accept payment.
      • Please do not email us to ask for other payment option.
      • We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
      Shipping
      • Usually we ship your order out within 24 hours in business day.
      • For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
      • Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
      Return Policy
      • Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
      • If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
      About Us
      • We are continually expanding our product selection to better serve your need.
      • We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
      • If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.


      Buy Now

    Related Items