Premium Plus A4 DTF Film Sheets & Powder Bundle – 2×100-Pack (200 Sheets) + 2.2 lbs Powder | PRINTIUM PRINTIUM ✦ Film + Powder Bundle · 2-in-1 System Premium Plus A4 Film & Powder Bundle
200 Sheets (2×100-Pack) + 2.2 lb (1 kg) Powder

Print more. Peel faster. Never run out mid-job. Two 100-packs of our top-tier Premium Plus A4 film — 200 sheets total — paired with a full kilogram of fine-grain adhesive powder. For shops running consistent A4 production, this is the restocking order that keeps both supplies moving at the same pace.

200 A4 Sheets Total 4–5s Press Time 2.2lb Powder (1 kg) 50+ Wash Cycles Nano-Matte A4 100 Sheets Instant Hot Peel No Wait Time 80–180 Micron TPU Powder 270–310°F Press Temp All Fabrics Compatible Bundle Contents Matched for the Same Workflow

① 2×50-Pack Premium Plus A4 Sheets

100 sheets of our top-tier A4 DTF film with advanced nano-matte coating. Tighter ink absorption and sharper edge definition than standard matte film — critical for small text, fine-line artwork, and photographic gradients. Every sheet is inspected for coating consistency.

② Premium DTF Powder (2.2 lb / 1 kg)

80–180 micron fine-grain TPU adhesive with nano-particle technology for uniform distribution across every sheet. Anti-static coating bonds only to inked areas for clean transfer edges. Soft, flexible finish — stretches with the garment without cracking or peeling.

03 Instant Hot Peel

Pull the film the moment it comes off the press — no cooling station, no waiting period. The nano-matte release layer delivers a smooth, residue-free peel every time, keeping your production throughput at maximum speed.

04 Nano-Matte Precision Coating

The "Premium Plus" designation comes from this advanced nano-matte layer — it holds even the smallest ink droplets in place without spreading, eliminating bleed on high-resolution artwork and tiny text that standard films cannot handle.

05 Anti-Static on Both

Both film sheets and powder feature anti-static treatment. The film ensures powder sticks only where ink lands. The powder shakes cleanly off transparent areas — no stray speckles, no white dust, clean retail-ready transfers on every sheet.

06 50+ Wash Cycle Durability

The Premium Plus nano-matte coating and fine-grain powder create a superior bond between ink and fabric fibers. Transfers are stretch-resistant, crack-resistant, and wash-resistant through 50+ cycles on cotton, polyester, nylon, and blends.

Technical Details Full Specifications 📄 Premium Plus A4 DTF Film Sheets Sheet SizeA4 — 8.3" × 11.7" (210 × 297 mm) Quantity2 × 100-Pack = 200 Sheets total MaterialHigh-quality PET film with instant release, anti-static, anti-slip, and ink-absorbing layers Surface FinishDouble Matte — Advanced Nano-Matte Coating Peel TypeInstant/Hot Peel (no wait time) — Cold Peel also compatible Press Temperature270–310°F (132–155°C) Press Time4–5 seconds (depends on fabric type) Ink CompatibilityAll water-based DTF inks, including Printium CMYKWW Anti-StaticYes — dedicated anti-static coating layer 🧪 Premium DTF Powder Weight2.2 lb (1 kg) ColorWhite Micron Size80–180 microns (Fine / Premium Grade) Material TypeHigh-Purity TPU (Thermoplastic Polyurethane) Melting Range240°–280°F (115°–140°C) Pressing Range260°–320°F at medium pressure (25–38 psi) Anti-StaticYes — bonds only to inked areas Durability50+ Wash Cycles — stretch and crack resistant 🖨️ General Compatibility Fabric CompatibilityCotton, Polyester, Nylon, Denim, Canvas, Leather, Spandex, Blends Printer CompatibilityAll modified desktop DTF printers — Epson L805, L1800, ET-8550, XP-15000, and industrial systems ConditionNew Bundle SKUPR-DBUN-004B Instructions How to Use

• 1 Print Your Design

  Load a Premium Plus A4 sheet into your DTF printer, matte side facing the printheads. Print your mirrored design. The nano-matte coating ensures precise ink absorption with sharp edges and no bleed.

• 2 Apply Powder

  While the ink is still wet, evenly apply Premium DTF Powder within 60 seconds. Shake off any excess — the anti-static formula on both film and powder ensures powder bonds only where ink was deposited.

• 3 Cure the Design

  Place the film in your DTF dryer or curing oven at 230°–280°F until the powder is fully melted and the surface appears glossy and transparent.

• 4 Heat Press onto Garment

  Position the cured film on the garment, printed side down. Press at 270°–310°F (132°–155°C) for 4–5 seconds at medium pressure (25–38 psi).

• 5 Peel Instantly

  Peel the film immediately while still hot — no cooling wait needed. The nano-matte release layer lifts cleanly with zero residue or ghosting. Start the next transfer right away.

• 6 Cool & Store

  Let the garment cool — the design sets fully as it cools. Store unused sheets sealed in their original packaging away from humidity. Reseal the powder bag immediately after each use.

Questions & Answers Frequently Asked Questions What is included in this bundle? The bundle includes two 100-packs of Premium Plus A4 DTF Film Sheets (200 sheets total, 8.3" × 11.7") and one bag of Premium DTF Powder (2.2 lb / 1 kg, 80–180 micron fine-grain TPU). Both products are from the Printium range and engineered to work together in the same DTF workflow. What makes Premium Plus different from standard Premium A4 film? Premium Plus features an advanced nano-matte coating that holds even the smallest ink droplets in place without spreading — eliminating ink bleed on high-resolution artwork and tiny text. It also delivers faster press times (4–5 seconds at 270–310°F vs 8–10 seconds for standard Premium film) and instant hot peel straight off the press, making it the top choice for speed and detail quality. Can I peel the film immediately after pressing? Yes — the Premium Plus instant hot peel technology means you can pull the film the moment it comes off the press. No cooling station, no wait. The release is smooth and clean every time. Cold peel is also supported for specific textured fabrics if preferred. What are the recommended press settings? Press at 270°–310°F (132°–155°C) for 4–5 seconds at medium pressure (25–38 psi). Always run a test on a sample garment when switching fabric types. The powder melts and cures in the 230°–280°F range before pressing. What fabrics and printers is this bundle compatible with? Fabric: cotton, polyester, nylon, denim, canvas, leather, spandex, and blended fabrics — both light and dark colors. Printers: all modified desktop DTF printers including Epson L805, L1800, ET-8550, and XP-15000, as well as industrial DTF systems. Compatible with all water-based DTF pigment inks including Printium CMYKWW. How should I store the sheets and powder? Store sheets sealed in their original packaging in a cool, dry place away from direct sunlight, humidity, and extreme temperatures. Do not bend or crease the sheets. Reseal the powder bag immediately after each use and store in a dry area to prevent clumping. Avoid exposing the powder to moisture or direct heat. Order with Confidence

Premium Plus film & powder bundle — same day shipping available on qualifying orders.

2-in-1 Bundle 200 Total Sheets 4–5 sec Press Time 50+ Wash Cycles DTFBANK × PRINTIUM