Ruckus T300 outdoor/indoor access point, part number 901-T300-US01 (US version). Dual-band concurrent 802.11ac, 2x2:2, BeamFlex+ adaptive antennas, IP-67 weatherproof housing. Powered by 802.3af PoE (48V / 0.35A); no PoE injector included.
Condition: Used, pulled from a working home network and bench-tested before listing.
Cosmetic: light scuffs and surface marks on the housing from normal use (see photos); no cracks or damage, housing and port gasket intact.
Verified: powers up on PoE, both radios broadcast, and clients pass traffic to the internet on both 2.4 GHz and 5 GHz (in the powered photo, the amber 2.4G LED indicates no client connected on that band at the moment of the photo; both radios tested passing traffic.). Factory reset before shipping.
Includes: T300 access point, pole/wall mount bracket kit, M25 data cable gland for weatherproof Ethernet entry, and ground wire with lug.
Firmware and compatibility: running Ruckus standalone (Solo) firmware 110.0.0.0.2005. Use it standalone as-is (managed through its own web UI; default login super / sp-admin, printed on the label), join it to a compatible ZoneDirector, or convert it to Ruckus Unleashed. Note: the T300 is supported on Unleashed up through version 200.7 only — it is NOT supported on Unleashed 200.8 or later. Please verify compatibility with your controller and firmware before purchasing.
First-boot tip: at factory default the AP broadcasts a Wi-Fi network named Configure.Me-030A70; the password to join it is the unit's serial number, printed on the label. It can also be configured over Ethernet at the IP it pulls from DHCP (fallback address 192.168.0.1).
Ships boxed in a re-used Ruckus package and padded with tracking.
