 When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
- PORTABLE EXTERNAL STORAGE: this M.2 NVMe cloner is specially designed for M Key NVMe PCIe SSD(22110/2280/ 2260/ 2242), Supports 2 M.2 NVMe hard disk reads and writes at the same time. Compatible with Windows/Mac/Linux, can be used to offline clone or to expand storage capacity by connecting PC , Laptop computers, smart TVs, PS4, XBOX and other devices.
- ONE-KEY OFFLINE CLONE: This dual-slot m.2 NVMe duplicator can not only be used as an external NVME SSD to expand your storage capacity, but also can be used for offline backup. No need to connect to a PC, just plug in and press the start button then you can back up your important data. LED indicator can monitor the SSDs' clone progress at any time. Note: please back up the data on the target disk before cloning to avoid losing important data.
- 10GBP/S HIGH-SPEED: ORICO USB 3.2 Gen2 m.2 cloner docking station is equipped with C to C cable and C to A cable, giving you more choices. The fastest transmission speed can reach about 1000MB/S with C to C cable and about 500MB/S with C to A cable. At the same time, it supports UASP acceleration protocol which can make your NVME SSDs run more quickly and stably.
- EASY TO USE: ORICO Tool-Free nvme dock are very easy to use, no need any tools. They all support plug & play and hot swap, no drivers required. Except the SSDs, you do not need to prepare anything else, because the package contains all the accessories you need: two 0.5m data cables (A to C and C to C) and a 5V/4A power adapter.
- 12-MONTH-WORRY-FREE WARRANTY: ORICO M.2 external drive docking station will automatically go to sleep after 10 minutes of inactivity; the hard disk is not inclued in the package; ORICO offers 12-month warranty and lifetime email technical support. If you have any problems, please contact us, we will give you a satisfactory solution within 24 hours. NOTE: it is a normal phenomenon that all SSDs will overheat due to high speed. Please touch it carefully to avoid burns.
Product DescriptionORICO M.2 NVMe SSD Duplicator Cloner Dual Bay Docking StationOffline Cloning Operating InstructionsProduct DescriptionORICO M.2 NVMe SSD Duplicator Cloner Dual Bay Docking StationNOTE1 - Do not use usb cable to connect to the computer during clone.
- If there is a bad sector in the SSD, copying may stop. Scan the SSD once before copying to make sure there are no bad sectors.
- Please back up the data on the target disk before copying to avoid loss of important data.
- Make sure that the two SSD disks can be recognized on the computer when plug in our nvme enclosure. If not, it could not clone.
NOTE2 - It's normal that the aluminum case heats up, for the high-speed NVMe M.2 drives generate much heat while working. Do not touch the SSD during operation. Please refer to the changing diagram of temperature above.
- For the brand new SSD drive, it may not find the drive, because the brand new SSD drive should be formatted before first time using. And also need to make the SSD drive partition.
- To get the 10Gbps data transmission rate, the USB 3.2 interface on your PC should be USB 3.2 Gen 2. Some PCs only come with USB 3.2 Gen1 whose max speed is 5Gbps.
- Cloning is completed, target disk will enter the offline mode, in offline mode, the disk cannot be recognized when the PC is connected with the USB cable. Therefore, you should select online mode manually: right-click (computer/my computer/this computer) to select management, then select disk management in the popup dialog box, and you will see a disk in the offline state, then right-click it to choose the online mode.
Main Features: - 1. ORICO external NVMe ssd docking station adopts USB 3.2 Gen 2 standard(USB C port), which supports an amazing data transmission rate up to 10Gbps.
- 2. Support one-key offline clone can directly transfer the data from Disk 1 to Disk 2 without going through the computer.
- 3. ORICO M.2 ssd enclosure constructed with aluminum alloy which is better for absorbed heat dissipation.
- 4. Support Plug & Play and Hot-Swapping. Easy installation & no driver required.
- 5. Operating system compatibility: Windows, macOS, and Linux.
On Jan 28, 2024 at 19:53:37 PST, seller added the following information:  |
|
