Description:

1.High strength and fast bonding. Suitable for directly attaching various components, especially LEDs to heat sinks.

2.Exellent thermal conductivity, strong adhesion, vacuum packaged for long storage life. High bonding viscosity. Short drying time.

3.Wide temperature application range (-60~200°C), resists short-term exposure up to 300°C.

4.Non-toxic, solvent-free, and can be safely used for elastic bonding, heat dissipation, insulation and packaging of electronics, instruments, LEDs, heat sinks, etc

Instructions:

1)Clean surface before use using alcohol. Do not use detergent or soap.

2) Extrude product directly from tube. Spread thinly over entire bonding surface. Insert item to be glued and press tightly to bond. Replace cap on tube immediately after dispensing.

3) Drying time is related to the relative humidity and temperature in the air; the higher the temperature, the faster the curing speed, and vice versa.

4) Recommended thickness: 0.1-0.5mm. Thinner is better.

Specifications:

Tube Contents: 5g (single)

Melting temperature: (200°C/24 Hours)

Evaporation: 0.001% (200°C/24 Hours)

Thermal Conductivity: >0.671W/m-K

Impedance: <0.06

Set Time: 3min (25°C)

Track Strength: 25Kg

Package Includes:

2 x 5g Tubes Heatsink Plaster