Single, new, and genuine Zebra ZD621T automatic cutter.This item will be shipped inside its original box, there's more movement inside than we consider acceptable (it's not packed firmly, there should be NO movement). Upon request we will open your box and add additional packing materials, the mechanism itself is wrapped in a single layer of bubble wrap with an inch or so of travel on either side. If no request is made we will do what we can for extra protection.
If you have any questions please send us a message, we value ourcustomers and stand behind our sales. Thank you for helping usprovide affordable housing for Americans.
Shipping:Single Unit: $10.00
Each Additional: $5.00These will be shipped UPS, we will eat the additional cost to help ensure you receive an intact item.AI Below__________Genuine Zebra ZD621T Cutter Upgrade Kit | Part: P1112640-232Upgrade your Zebra desktop printer with this genuine, factory-original Zebra Automatic Cutter Upgrade Kit (Part Number: P1112640-232). This field-installable accessory adds full automatic label-cutting functionality to your printer, eliminating the need to manually tear labels and drastically speeding up your shipping, logistics, or manufacturing workflows.📦 What's Included
- 1x Genuine Zebra 4-Inch Automatic Cutter Module
- 1x Front Bezel / Cover Panel
- Mounting Screws
- Note: Requires a standard Torx T10 screwdriver for installation (not included).
✨ Key Features & Benefits
- 100% Automatic Cutting: Cleanly and precisely severs label backing paper, liner material, and continuous tag stock.
- Fully Programmable: Control the blade via your software or driver. Set it to cut after every single label, after a specific batch size, or at the end of the entire print run.
- Seamless Field Installation: No complex wiring or soldering required. Simply remove the factory front bezel, plug the module directly into the printer's built-in internal connector, and screw it into place. Takes less than 5 minutes!
- Heavy-Duty Construction: Genuine OEM Zebra hardware built for high-volume, reliable industrial performance without jamming.
⚙️ Official Compatibility ListThis kit is designed exclusively for 4-inch Thermal Transfer desktop printers. It is fully compatible with:
- Zebra ZD621T (Standard Thermal Transfer models)
- Zebra ZD621R (RFID Thermal Transfer models)
❌ CRITICAL INCOMPATIBILITY NOTICE – WILL NOT FIT:
Please check your printer model before purchasing. This kit WILL NOT FIT the following models due to different internal frame structures:
- ZD621D (Direct Thermal models – requires part P1112640-030)
- ZD621C (Ribbon Cartridge models)
- ZD421 Series (Requires part P1112640-230 or P1116110-025)
- ZD611 / ZD411 Series (2-inch wide printers)
🔧 Quick Installation Guide
- Turn off the printer and disconnect the power cable.
- Use a Torx T10 screwdriver to remove the screws on the bottom front edge of the printer.
- Pull off the standard front plastic cover.
- Slide the new Cutter Module up into place until the internal electrical connectors plug together.
- Secure the module using the mounting screws.
- Power on, route your labels through the cutter slot, and you are ready to print!
🚚 Shipping & Returns
- Fast shipping with secure packaging to prevent damage during transit.
- Please verify your exact printer model number (located on the sticker underneath your machine) before ordering to ensure compatibility.
