Anycubic Photon Mono M7about this item

• 【Speed Your Creativity】Anycubic Photon Mono M7 prints at speeds of up to 150mm/h with high speed resin and 90mm/h with regular 3d resin, resulting in shorter wait times and cost savings
• 【10.1 inch 14K Mono LCD】Photon Mono M7 is equipped with a 10.1-inch 14K monochrome screen, with a resolution of 13312 * 5120 and extremely fine XY axis pixels of 16.824.8 microns. It can achieve a minimum forming diameter of 0.15mm, a minimum outlet diameter of 0.3mm, making the model details outstanding
• 【Anycubic COB LighTurbo 3.0】The COB light source system combined with Fresnel lenses and front reflectors can achieve a light angle within 3° and light uniformity is more than 90%. Anycubic LighTurbo 3.0 is also equipped with a light-off compensation algorithm, which ensures that each layer of the model is successfully exposed and removed from the mould, improving the print success rate
• 【Intelligence Printing Features】Photon Mono M7 resin printer boast 7 intelligent inspections, platform installation status detection, component connection status detection, residue detection, resin detection, failed print detection, release film lifespan management and real-time sensing curves. These can reduce operational errors and increase printing efficiency
• 【Enough Large Printing Size】 With a large build voume of 223*126*230mm/8.77x4.96x9.05 inch. Users can easily print larger 3D models or achieve batch printing, greatly improving productivity

Anycubic Photon Mono M7 Pro

about this item

• 【Ultra Fast Speed】Anycubic Photon Mono M7 Pro achieves a high speed of 170mm/h in a 0.1mm layer thickness test using high-speed resin. At the same time, the printing speed of standard resin reaches 130mm/h, breaking boundaries and greatly improving printing efficiency, achieving truly fast printing
• 【High-Precision 14K】With a 14K monochrome LCD screen with 13312*5120 resolution and 16.8 ×24.8 μm XY resolution, the Photon Mono M7 Pro prints holes as small as 0.3 mm in diameter, which is more than enough to handle fine printing tasks and make your models stand out
• 【Advanced COB LighTurbo 3.0】The COB light source system, combined with Fresnel lenses and front-facing reflectors can reach the light angle within 3°, and light uniformity is more than 90%. Anycubic LighTurbo 3.0 is also equipped with a light-off compensation algorithm, which ensures that every layer of the model is successfully exposed and removed from the mold, significantly improving the printing success rate
• 【Upgraded Assisted Features】The dynamic temperature-controlled resin vat will adjust the temperature of the resin material to maintain the optimal print temperature at all times. And resin auto-fill feature enables automatic filling and one-key recycling of remaining resin
• 【Intelligent Design】Building on component connection status detection, residue detection, resin level Detection, failed print detection, and release film lifespan management, Photon Mono M7 Pro has added build plate installation detection. 6 types of intelligent detection can achieve startup detection, simplify the printing process, and reduce problems caused by misoperation

In The Mono M7 Pro

Print platform * 1

Resin vat * 1

WiFi antenna

Hex key set

Manual * 1

USB drive * 1 equipment

Funnel * 5

Scraper * 2

Sreen protector kit

Leveling paper

Auto-fill unit

Power cord

Anycubic Photon Mono M7 Maxabout this item

• 【Huge Build Volume】 Anycubic Photon Mono M7 Max offers a spacious printing size of 298mm × 164mm × 300mm, allowing for the creation of full-size masks, intricate game terrains, detailed cosplay props, and various models without the hassle of cutting and assembling
• 【Upgraded Light Source】 LighTurbo 3.0 combines a COB light source and Fresnel lens and factory calibrate technology can reach the light angle within 3°, and light uniformity is more than 90%. With the anti-aliasing feature activated and paired with high-precision positioning lead screws, it effectively minimizes layer lines and aliasing to achieve a higher level of precision
• 【Speedy and Convenient】 The Photon Mono M7 reaches a maximum speed of 60mm/h thanks to intelligent release 2.0. A 200% speed increase comparing to the previous M3 Max printer. In addition, the flip-open cover design upports one-hand opening and hovering angles anywhere greater than 45°that can save time and space
• 【Resin Management Features】 Dynamic temperature control resin vat will adjust the temperature of the resin material to maintain the optimal print temperature at all times for print success. And resin auto-fill feature allows for automatic filling and one-key recycling of remaining resin. Release film uses integrated design for easier replacement
• 【User-Friendly Improvements】After printing is completed, the model can be suspended above the platform with a small angle, allowing the resin to flow back into the resin vat. And a bigger resin vat with 1300ml volume for large models

Anycubic Wash and Cure 3about this item

• 【Larger Size for Upgraded Capacity】Compared to Anycubic Wash & Cure 2, Wash and Cure 3 has an impressive 42% increase in cleaning basket capacity, this makes it perfectly tailored for LCD (light-curing) 3D printers with a size of 7.3 inches or less. The volume of the cleaning bucket has also increased to 4L, meeting the cleaning needs of larger and more 3d models
• 【Gooseneck light design】The "Innovative Flexicure Gooseneck Light Design" of ANYCUBIC increases the energy value by 30,000uW/cm² within a 1-3 cm irradiation range, significantly strengthening the curing effect on subtle areas such as the top of models and the hem of garments
• 【Dual-layer Design, IPA Saving】The double-layered PP material cleaning basket is designed to support cleaning with defferent platforms. It features two adjustable heights at 100mm and 165mm, providing flexibility to accommodate printing platforms ranging from 5.9 inches to 7.3 inches. This design also maximizes the efficiency of IPA usage
• 【Enhanced Curing Power】By utilizing a new bead arrangement and lens light source, Wash & Cure 3.0 offers a 20%* improvement in curing uniformity over the previous generation 2.0. This results in a more thorough and comprehensive curing of the entire model
• 【Quiet and Simple】Cleaning and curing dual modes, easily selected with one click; Gooseneck light curing mode can be easily toggled on and off with one click. Adjustable from 1 to 30 minutes at will. After the closed structure design and software optimization, machine can effectively reduce the cleaning, curing noise interference, to create a quieter and more comfortable working environment

Anycubic Wash and Cure 3 Plus

About this item

• 【Higher Compatibility】Anycubic Wash and Cure 3 Plus upgraded the washing size 8.97''x5.03''x10.23''. And compared with Wash & Cure Plus, the washing volume of the washing basket is increased by about 13.4% to 7.6L, which is suitable for more LCD 3D printers like Photon Mono M5s, Saturn 3 series or other 10.6 inches and below.

• 【Flexicure Gooseneck Light】Due to the innovative Flexicure gooseneck light design, Wash & Cure 3 Plus can increase the energy value by 30,000uW/cm²* in the 1~3cm irradiation range, which greatly enhances the solidification effect of the top of the model, the figure skirt, and other subtle areas, plus the light tube can be twisted, making it more convenient to use

• 【Better Curing Effect】The Anycubic Wash & Cure 3 Plus features a brand-new arrangement of lamb beads combined with a lens light source. It offers a 20%* improvement in curing uniformity than previous generation Wash & Cure Plus. This results in a more thorough and comprehensive overall cure of the model, ensuring better quality and consistency.

• 【Efficient IPA utilization】The dual-layer PP material cleaning basket supports washing with platform and rust-resistant. It is equipped with two adjustable heights of 150 mm and 250mm allowing printing platforms from 6.6 to 10.6 inches, maximizing alcohol usage efficiency.

• 【Dual-layer Curing】A specially designed double-layer curing platform increases the number of models cured per cycle and markedly improves curing efficiency.

Tech Specs:In The BoxComparisonFeaturesAnycubicWash & Cure 3 PlusAnycubic Wash & Cure PlusFuncionWash & Cure 2-in-1Wash & Cure 2-in-1Control MethodMulti-touch buttonsTouch Button & Control KnobMaximum Cleaning Volume
(Cleaning without platform)
(Cleaning with platform)228*128*260mm
192*120*235mmMaximum Curing Sizeφ220*260mmφ190*245mmBuild Light14pcs 405nm+Gooseneck Light16pcs 405nmTime Setting1-30mins1-60minsCleaning ModeIPA Soaking ModeIPA Soaking ModeRated Power36W25WAnycubic Wash and Cure 3 Maxabout this item

• 【Extra-large, Ultra-capable】Anycubic Wash and Cure 3 Max has a maximum wash capacity of of 305 x 165 x 300 mm and can hold 15.1L of liquid, which is a 98.55% increase over the Wash & Cure 3 Plus. It is compatible with most resin 3D printers with a build volume of 13.6-ich or lower
• 【One-click Washing and Curing】,The cleaning and curing process is scientifically set up at the factory, just click the auto mode and start it, the wash & cure 3 max will automatically cure the 3d models after cleaning them. Experience streamlined model processing that saves you time and effort
• 【Customizable washing and curing process】Wash & Cure 3 Max has been upgraded to support more modes. These include automatic mode (including washing and curing), washing mode, and curing mode. All modes can be used independently and customized in terms of duration according to usage requirements
• 【Powerful Cleaning, IPA Saving】360° spray rinsing and Bottom section cleaning can effectively rinse residual resin while cleaning resin from the bottom and small holes. The dual cleaning modes can efficiently utilize detergent, saving nearly 50% in consumption compared to traditional immersion wash and cure machines
• 【360° Dimensional Curing】, Featuring a 360° automatic rotating curing platform, this machine provides high curing energy values 25,000 μW/cm² and 18 cm long irradiation distances, enabling comprehensive, efficient curing for your models

PaymentDelivery detailsTerms of salesAbout usContactPayment1.We accept Paypal,Google must be within 8 days after you ordered the item.Delivery details1.We cannot arrange shipments on weekend or public holidays.
2.Your orders will be shipped out within 1-2 business days after payment received.
3.If there is any question about delivery details,please contact us, we're alwasys at your service.
Terms of sales1.The returns should be returned with our original packages. 2.Defective products must be returned within 30 days. 3.Customers must contact us first for the return address. 4.In all cases, buyers pay for the shipping fees at their own cost to return products for exchange or refund. We will be responsible for the postage of replacements. 5.Please kindly feel free to contact us first, if you receive the items with quality problems or damaged, we would like to offer replacement or refund service for you. About us

Who are we?

Founded in 2015, Anycubic has become one of the most popular 3D printer brands in the market, with around 300 employees based in China.But, we didn’t start fancy as it seems to look today.

"Graduated in 2015, I came back to China from New Zealand. I was so excited and full of curiosity when landed in Shenzhen the first time”, James , co-founder of Anycubic and a Ph.D of University of Auckland said.

"Lu Ouyang, Anycubic’s Founder and CEO, is my childhood friend. He had a company before Anycubic providing electronic modulesand 3D printer accessories for over 4 years.3D printer itself wasn’t our first choice. We hadn’t even had the confidence to rush in.

But after seeing clients increasingly relying on us for key components of their DIY printers, We realized we could do it, and do it much better.”“I didn’t think much but only hope to explore more possibilities with the 3D printing technology.There is nothing to be afraid of. So why not make a difference.” Ouyang added.

In 2015, Anycubic was founded, without much hesitation.

“Following our heart is important. But the real world is harsh. There were so many up and downs. We cannot remember how many sleepless nights out there at the early stage.” Anycubic founders said.

After a whole year’s hard work, the 1st model Anycubic Mega came on board in2016. Fortunately our work paid off. Mega became so popular in the marketin a short period of time and our journey as a professional 3D printer maker officially started. We all were amazed and excited but we did not stop there. The second and third generations were launched soon after along the way..

Indeed, 3D printing technologies can do a lot. But first of all we believe 3D printers should be accessible and affordable to all instead of being rocket science and beyond budget. We believe each one of us deserves the freedom to make our ideas, creativity and imagination a reality. Anycubic is committed to being one of the best choices for freedom to make.

3Dream, for freedom to make, Side by side with you, we know we will make it.

For Freedom to Make 3D Printing Education Incubation Project

Inspired by Anycubic' s vision — "For Freedom to Make" — the project is the company' s 3D printing education incubator founded in Shenzhen on September 2, 2020. It demonstrates Anycubic' s aspiration of helping everyone achieve the freedom of creation and invention using 3D printing technologies.

Deemed Anycubic' s first high-tech 3D printing incubator, the project aims to support 3D printing basic research and training, and create a 3D printing education ecological circle to encourage more people to explore the applications of 3D printing in different areas. Support will include 3D printing products, printing services and consultancy, among others.

Incubated partners will hail from various sectors including but not limited to universities, research institutes, and enterprises. This project indicates Anycubic's perseverance in exploring the 3D printing world and boosting the development of innovation in the economy and society.

Addressing the barriers to STEM education will require a collective effort from both institutions and 3D providers, in which we leverage effectively our resources to initiate four 3D printing camps this summer.

The first camp ceremony was held at Yale School of Engineering and Applied Science on April 23 followed by 3 online boot camps known as "ANYCUBIC X Yale Funbotics 3D Modeling and Printing Camp". Guided by Yale mentors, in all boot camps, the students will learn about the inner workings of 3D printers and how to 3D model as well as 3D print their creations.

The Bigger Picture with Education Incubation Project

Promoting 3D printing education and research is a marathon not a sprint. The partnership with Yale Funbotics is Anycubic' s first port of call and the company will continue to work hard to sponsor cooperation with more global universities, research institutes, enterprises, and academic organizations of a global nature and help them achieve success in exploring the world.

Contact us via

Contact1.Your Positive response will be an encouragement for us to offer the better quality and the better service in future.
2.If you are not satisfied with them, please contact us first via Contact Seller. Your messages will be answered within 18 Hours.3.We shall try our best to solve your problem to your satisfaction.

On Jan 12, 2026 at 02:48:13 PST, seller added the following information: