Measuring 156 × 120 mm, the ultra-slim backlight panel connects via the included 1-meter cable: simply plug the Type-C end into the panel, the USB-A end into any 5V power source (e.g., wall charger, power bank, or computer), and use the inline touch switch to turn on/off or long-press to adjust brightness. 𝐰𝐢𝐭𝐡 𝐏𝐨𝐩𝐮𝐥𝐚𝐫 𝐅𝐀𝐙𝟎𝟎𝟕 𝐌𝐨𝐝𝐞𝐥𝐬 𝐨𝐧 This backlight panel kit matches the structural dimensions of the widely shared FAZ007 lithophane frame on MakerWorld—a design commonly used in CMYK LED backlight modification projects for Bambu Lab printers. Simply search “CMYK LED Backlight Board” or “FAZ007” on MakerWorld to download the compatible 3D-printable file for free. (3D-printed housing not 𝐃𝐢𝐦𝐦𝐢𝐧𝐠 𝐟𝐨𝐫 𝐅𝐮𝐥𝐥-𝐂𝐨𝐥𝐨𝐫 𝐀𝐫𝐭 Use the inline touch switch to toggle power or long-press for stepless brightness adjustment. Insert the panels into your custom 3D-printed frame to turn photos of food, scenery, weddings, or graduations into glowing CMYK lithophane art—where details and depth come alive under light.
𝐔𝐧𝐢𝐟𝐨𝐫𝐦, 𝐋𝐢𝐠𝐡𝐭𝐢𝐧𝐠 𝐟𝐨𝐫 𝐂𝐨𝐥𝐨𝐫 120-LED array, 10 more than typical, delivers uniform illumination across 156×120 mm to enhance CMYK photolithography color gradients and shadow detail. Built-in USB Type-C port with 1-meter cable. Embedded touch-sensitive switch for control. Operates on 5V USB-A power—no external adapter needed. Low operating temperature, high energy 𝐋𝐢𝐠𝐡𝐭 𝐟𝐨𝐫 𝐕𝐞𝐫𝐬𝐚𝐭𝐢𝐥𝐞 𝐔𝐬𝐞 An optimized driver circuit helps minimize visible flicker, providing steady lighting suitable for prolonged viewing. With adjustable brightness, it adapts seamlessly to different environments—whether as a desktop photo display, ambient night light, or creative photography fill 𝐃𝐞𝐬𝐢𝐠𝐧 𝐟𝐨𝐫 𝐄𝐚𝐬𝐲 𝐃𝐈𝐘 To adjust brightness, long-press the touch-sensitive switch for 2 seconds. Use only the provided cable for power supply—other cables may prevent the panel from lighting up. If the panel still does not light up with the provided cable, try replacing the power adapter. ‌Note: Fast-charging adapters are not supported.