Cisco · Used — Tested · Tested & Verified

Cisco C8300-2N2S-4T2X

A fully-loaded Catalyst 8300 voice edge router — dual redundant 650W AC power supplies and three Cisco voice modules already installed, tested, and ready to deploy.

Since 1987Trusted IT hardware source 90-Day WarrantyBuy with confidence Fully TestedVerified before shipment Ships from CaliforniaFast US dispatch Product Overview

The Cisco C8300-2N2S-4T2X is a 2RU Catalyst 8300 Series Edge Platform built for medium and large enterprise branches that need high WAN density, SD-WAN performance, and on-box voice services in a single chassis. This unit ships as a complete voice-ready bundle: the router carries four built-in 1 Gigabit copper ports and two 10 Gigabit SFP/SFP+ ports, two hot-swappable PWR-CC1-650WAC power supplies for full redundancy, and three factory Cisco voice modules already installed — a NIM-2FXS/4FXOP analog voice module, a NIM-2MFT-T1/E1 digital trunk module, and a NIM-PVDM-32 DSP module on a C-SM-NIM-ADPT service-module adapter. It is a turnkey platform for a Unified Communications gateway, a branch SD-WAN aggregation router, or a PSTN/analog voice interface. Every unit is pulled from a working environment and fully tested before shipment.

Key Features & Benefits

• High WAN & LAN density: Four built-in 1G RJ-45 ports plus two 10G SFP/SFP+ ports deliver up to 24 Gbps of embedded throughput without consuming a single expansion slot.
• Carrier-grade voice, already installed: Ships with a NIM-2FXS/4FXOP (2x FXS + 4x FXO analog), a NIM-2MFT-T1/E1 (2-port digital trunk), and a NIM-PVDM-32 DSP module — a complete analog-plus-digital voice gateway out of the box.
• Redundant power out of the box: Two PWR-CC1-650WAC 650W 80 Plus Gold AC supplies provide 1+1 redundancy so a single PSU failure never takes the branch offline.
• Modular and future-proof: Two NIM slots, two SM slots, and one PIM slot let you scale interfaces, DSP capacity, and security services as the site grows.
• SD-WAN & SASE ready: Runs Cisco IOS XE 17.x in both SD-WAN and autonomous modes, with up to 18.8 Gbps of IPsec throughput for encrypted branch connectivity.

Ideal For

• MSPs standardizing branch voice + dataRoll out one identical Catalyst 8300 platform across dozens of client sites that need both SD-WAN routing and on-site analog/PSTN voice.
• Enterprise voice / UC gatewaysTerminate analog phones and fax lines (FXS), connect to the PSTN (FXO / T1/E1), and run CUBE SIP trunking with the on-board PVDM DSP resources.
• Network labs & 8000 migrationsA tested, fully-loaded chassis for CCIE/CCNP labs, staging, or migrating an ISR 4000 voice deployment onto the Catalyst 8000 platform.

Technical Specifications SpecificationDetails Model / Part NumberC8300-2N2S-4T2X BrandCisco Product TypeCatalyst 8300 Series Edge Platform (Router) Form Factor2RU rack-mountable Built-in Interfaces4 x 1G RJ-45 (copper) + 2 x 10G SFP/SFP+ NIM Slots2 SM (Service Module) Slots2 PIM Slots1 Installed — NIM Slot 1NIM-2FXS/4FXOP (2-port FXS/FXS-E/DID + 4-port FXO analog voice) Installed — NIM Slot 2NIM-2MFT-T1/E1 (2-port Multiflex Trunk Voice / Clear-channel Data T1/E1) Installed — SM SlotC-SM-NIM-ADPT adapter with NIM-PVDM-32 DSP / PVDM module DRAM8 GB default (upgradeable to 32 GB) Flash / Boot8 GB on-board Storage (M.2)16 GB default (32 GB / 600 GB / 2 TB NVMe options) Power Supplies2 x PWR-CC1-650WAC (650W AC, 80 Plus Gold, 100–240V, hot-swap, 1+1 redundant) IPsec ThroughputUp to 18.8 Gbps (SD-WAN, 1400-byte) SoftwareCisco IOS XE 17.3.2 or later (SD-WAN + autonomous) Operating Temperature32 to 104°F (0 to 40°C) ConditionUsed — Tested What's Included

• 1 x Cisco C8300-2N2S-4T2X Catalyst 8300 chassis
• 2 x PWR-CC1-650WAC 650W AC power supplies (installed)
• 1 x NIM-2FXS/4FXOP analog voice module (installed in NIM slot 1)
• 1 x NIM-2MFT-T1/E1 T1/E1 voice trunk module (installed in NIM slot 2)
• 1 x C-SM-NIM-ADPT service-module adapter with NIM-PVDM-32 DSP module (installed)
• 1 x fan tray

Condition Used — Tested. Unit was pulled from a working environment and has been tested and verified for full functionality prior to shipment. Cosmetic wear may be present. Official Datasheet

View the official Cisco Catalyst 8300 Series datasheet

Questions before you buy? Message us through — our team answers technical questions about configuration, compatibility, licensing and international shipping. ¡También hablamos español! We serve customers across the US and Latin America.

Need more than one? We also stock Cisco Catalyst 8200 & 8500 routers, ISR 4000 series, voice NIMs & PVDM modules, and 10G SFP+ transceivers.

Ask us for volume pricing, bundles, or hard-to-find part numbers — visit our store to see everything we carry.

Payment

Immediate payment is required.

We accept PayPal Payments only.

Credit Cards will be processed by PayPal.

Sales tax: Orders to California addresses are subject to 7.75% - 9% sales tax.

Shipping

We offer free shipping only within United States.

We'll only ship to the address provided during the checkout, No exceptions!

All orders will ship out according to the handling time with tracking a number within 24 hours.

Friday, holiday, and weekend orders will be shipped out on the next business day.

Estimated shipping times are determined by the United State Postal Services/DHL/FedEx/UPS, customs delays, holiday and/or weather delays which are out of our control.

Yes, we ship internationally. Please contact us for a shipping rate prior to buying.

Returns

We accept returns that are postmarked back to us within 30 days from delivery date.

Please include your order number and reason for return with all exchanges.

Refund will be given as money back.

Return shipping will be paid by the seller.

25 percent restocking fee will be charged.

Important: All returns required an RMA number or the package will be rejected without proper documentation. Please contact us for RMA instruction.

Warranty & Customer Service

90 days warranty unless stated with no warranty under the "product detail."

Our goal is to provide you with the utmost positive shopping experience - from purchase to delivery.

If you have any questions about the product or your order be sure to contact us via Messages for assistance and we will do the best we can to ensure your satisfaction.