⚠️ IMPORTANT: REPAIR COMPONENT ONLY🚫 TOUCH SCREEN DIGITIZER ONLY: This listing is for the Outer Touch Screen Digitizer Glass Panel ONLY. It DOES NOT include the inner LCD display screen.
🛠️ This is a replacement component used for Repairing/Replacing broken, scratched, cracked, non-responsive, or uncalibrated touch screen panels.
📦 Packaging & SpecificationsCompatible Model:For ZZB ZB10*(IMPORTANT: This tablet has two different ribbon cable versions: 45-Pin and 51-Pin. Please check your original touch flex cable and select the correct pin count before purchasing!)*
Screen Size: 10.1-inch.
Product Type: Touch Screen Panel Digitizer Glass.
Condition: Brand New & Factory Tested.🧪 Important: Test Before InstallationFunctional Test: We strongly recommend performing a functionality test BEFORE final installation or locking the screen into the frame. Connect the digitizer flex cable to the board to verify touch sensitivity and calibration across the screen area.
Handling: The touch digitizer and its ribbon cable are highly sensitive precision electronics. Handle with extreme care; do not apply excessive pressure to the glass surface or fold/twist the ribbon cable.
🚛 Shipping & Damage ClaimsLogistics Damage: If the product arrives damaged due to shipping, please retain the original outer packaging and contact us via messages immediately for assistance.
🤝 Customer Satisfaction & SupportExpert Help: Unsure if you have the 45-pin or 51-pin version? Send us a clear photo of your original screen panel and its printed flex cable connector, and our technical team will help you confirm compatibility!
Dedicated Support: We aim for a 5-star shopping experience. If you have any questions, please feel free to message us via . Our team is committed to providing a fast and satisfactory solution.
🛠️ NotesBatch Variations: Due to production improvements, markings on the flex cable or adhesive layout may vary, but functional compatibility is guaranteed.