MarkForged Onyx One (Gen 1)FDM Carbon Fiber 3D Printer
Used, in good working condition, however some of the consumables need to be replaced. The rear bowden tube (that enters the machine from the outside) and rear rubber grommet appear to need replacing. The interior bowden tube from the extruder to the nozzle is slightly too short, which causes some of the plastic cable chains to rub against the top of the machine, causing a noise. We are also unsure of the condition of the nozzle, but it does appear to be in fair shape. The belts are beginning to show signs of wear, however we have been properly tuned prior to listing. It is missing two of the internal filament spool holder caps. This machine has only ever printed MarkForged Onyx filament and was well maintained through its life. While we do not have the original Eiger account associated with the machine, from our experience with previous machine sales, MarkForged support will transfer the machine upon being given the serial/access code. Please contact us with any questions PRIOR to purchasing.
We do not have enough filament for a full test print, however the machine printed the bed level test multiple times successfully.
Please read below for freight shipping information.
Freight Information:
- Shipping is calculated based on your location for anywhere in the lower 48 states.After payment we will ship your products with a freight trucking company strapped to a pallet and shrink-wrapped for the safety of your order.ALL SHIPMENTS ARE INSURED.Please allow 7 to 10 days for arrival.
WE MUST SHIP TO YOUR ADDRESS ENTERED AT CHECKOUT PER RULES. WE WILL CONTACT YOU VIA TO VERIFY YOUR ADDRESS BEFORE SHIPPING.
- For Commercial Addresses:A semi-truck has to be able to gain access to the business, and it cannot be in a residential area.
- For Residential Addresses:It is vital that you are present when the shipment arrives. The trucking company will call you before delivery.
- Liftgate service is available by request.
ACCEPTANCE:IMPORTANT - READ THE BELOW STATEMENT:We at BudgetSavers take every precaution to package your items properly for shipment; however, it is important that you open and inspect all equipment pieces you purchased from us. If you, or someone else on your behalf, accept the delivery with no damage noted on the bill of lading and damage is later found,you will not be able to make a claim.Once you accept the freight, you waive all rights to making a freight claim.Please inspect the item during delivery and note any damage on the bill of lading before the freight driver leaves.Do not let the driver leave without noting the damage on the bill of lading.
