UBB Store

WiFi 4 USB Nano Wireless Network Dongle Adapter for Linux Black For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WiFi 4 USB Nano Wireless Network Dongle Adapter for Linux Black

Price: US $18.59

WiFi 4 USB Nano Wireless Network Dongle Adapter for Linux (Black)

WIFI 4 USB NANO DONGLE FOR LIBRE COMPUTER SBCs: Small plug and play 2.4GHz WiFi for single board computers with up to 150Mbps speed. Measuring 19mm x 14mm x 5mm, keep neighboring USB ports unobstructed. Low power design stays within the 500mA power budget of USB 2.0 ports.
PLUG AND PLAY FOR LINUX: Supports all current Linux LTS versions and Windows. No installation required for most Linux kernels, just insert into any USB 2.0 or higher port and connect to any 2.4GHz wireless network. Compatible with personal computers with USB 2.0 and 3.0 Type A ports. Built on the Linux mac80211 and cfg80211 frameworks, supports in-kernel wireless management.
LATEST WPA3 SECURITY STANDARDS COMPLIANT: Supports the latest WPA3 SAE security standards. Simultaneous Authentication of Equals provides additional protection from password brute forcing and dictionary attacks. WPA2 / WPA are no longer secure and passwords can be defeated in minutes. 802.1X network access control, and SoftMAC for future extensibility.
ADVANCED FUNCTIONALITY: AP mode, monitoring/sniffing mode, and 40MHz channels for up to 150Mbps (18.75MB/s) rates via integrated 1T1R 2dB antenna with 18dB transmit power. Configurable MAC to programmable protocol handling.
PREREQUISITES: 150Mbps (18.75MB/s) PHY rates require AP advertising 40MHz channels. 20MHz channels are limited to 72.2Mbps (9.025MB/s). Actual transmit efficiency is a function of dongle temperature and signal to noise ratio. Peak performance around 75% of PHY rate in low noise environment at 10M. Linux support requires CONFIG_MT7601U. WiFi 4 operates on the 2.4GHz band (2.400GHz-2.4835GHz) using the IEEE 802.11b/g/n standards.
CHECK FOR POWER SUPPLY ISSUES: Make sure that the device is getting 5V or higher during load. If power to your SBC is insufficient, this device may become underpowered and drop off the USB bus or periodically disconnect and/or exhibit low throughput. If you are unsure, please test this device with the 5V 3A power supply.

WiFi 4 USB Nano Wireless Network Dongle Adapter for Linux

Shipping

We offer FREE shipping on all orders!
We ship within Three business days of payment, usually sooner.
We use a selection of shipping services such as UPS, FedEx, USPS etc.
We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed.
Local pickups and combined shipping options are not provided at this time.

Return

You can return a product for up to 30 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.

Payment

We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an sale, as that will allow us to post your item to you sooner!

response

Customer satisfaction is very important to us.
If you have any problem with your order, please contact us and we will do our best to make you satisfied.

If you have any queries, please contact us via . We usually respond within 24 hours on weekdays.

Please visit our store to check out other items for sale!

Thank you for shopping at our store.