Featuring a GDSTIME 8010 USB Fan • PETG Housing • Integrated Honeycomb Grille

Give your G9’s NVMe storage compartment dedicated airflow with a clean, purpose-built cooling upgrade.

Designed and fit-tested on an original GMKtec NucBox G9, this replacement access-cover base combines a GDSTIME 80 × 80 × 10 mm USB fan with a durable, one-piece printed housing.

❄️ Dedicated Cooling

The GDSTIME 8010 fan adds active airflow to the NVMe storage compartment, helping move heat away from your drives during use.

🔌 Simple USB Power

Connect the fan to a suitable USB port—no internal wiring or soldering required.

🛡️ Durable PETG Construction

Printed in PETG for toughness and better heat resistance than standard PLA. The integrated honeycomb grille protects the fan while keeping the assembly simple.

🔧 Uses the Original Mounting Points

Three locating tabs and your two original access-cover screws secure the base to the G9.

✨ Raised Base with Clear Feet

Clear adhesive feet provide airflow clearance beneath the grille and help protect your desk.

📦 What’s Included

One PETG cooling-base housing with integrated honeycomb grille

One GDSTIME 8010 USB-powered fan

Clear adhesive feet

Mini PC and storage drives are not included. Retain your original access-cover screws for installation.

🛠️ Installation

Power off and unplug your G9.

Remove the original SSD access cover, keeping its two screws.

Insert the cooling base’s locating tabs and secure it with the original screws.

Connect the fan’s USB cable before powering the system back on.